High-Quality Lifting Hook Series
Product InformationHooks are the most commonly used type of spreader in lifting machinery and are often used as part of complete sets with other lifting equipment. Hooks frequently endure impact during operation, so they must be made of high-quality carbon steel with good toughness.There are various types of hooks available, including shackles, rings, pear-shaped rings, long rings, combined rings, S-hooks, nose hooks, American hooks, claw hooks, eye-shaped sliding hooks, hooks with safety clips, screws, and chain shackles. These hooks feature unique, new, high-quality, and safe designs. They are suitable for use in factories, mines, petroleum, chemical industries, and shipyards. They are indispensable tools in every factory workshop and even in households. The product quality is safe and reliable, with a high safety factor, and the static load safety factor can reach up to 3 times. The lifting capacity ranges from 0.5 tons to 150 tons.Scrap Standards:Hooks should be discarded if any of the following conditions occur:Obvious cracks appear on the product surface.Wear in the dangerous section reaches 10% of the original size.The opening degree increases by 10% from the original size.The torsional deformation of the hook body exceeds 10°.The dangerous part or the neck of the hook becomes plastically deformed.The hook threads become worn.When the wear of the hook bushing reaches 50% of the original size, the bushing should be replaced.When the wear of the part hook mandrel reaches 5% of the original size, the mandrel should be replaced.Due to the wide variety of hooks, it is not feasible to list product parameters individually here. For detailed product information and recommendations, please contact our staff before making a purchase. We will be happy to recommend the most suitable product type based on your usage environment and requirements...
- Ex Tax: $0.00
- Product Code: VİNÇ
- Availability: In Stock
Product Information
Hooks are the most commonly used type of spreader in lifting machinery and are often used as part of complete sets with other lifting equipment. Hooks frequently endure impact during operation, so they must be made of high-quality carbon steel with good toughness.
There are various types of hooks available, including shackles, rings, pear-shaped rings, long rings, combined rings, S-hooks, nose hooks, American hooks, claw hooks, eye-shaped sliding hooks, hooks with safety clips, screws, and chain shackles. These hooks feature unique, new, high-quality, and safe designs. They are suitable for use in factories, mines, petroleum, chemical industries, and shipyards. They are indispensable tools in every factory workshop and even in households. The product quality is safe and reliable, with a high safety factor, and the static load safety factor can reach up to 3 times. The lifting capacity ranges from 0.5 tons to 150 tons.
Scrap Standards:
Hooks should be discarded if any of the following conditions occur:
- Obvious cracks appear on the product surface.
- Wear in the dangerous section reaches 10% of the original size.
- The opening degree increases by 10% from the original size.
- The torsional deformation of the hook body exceeds 10°.
- The dangerous part or the neck of the hook becomes plastically deformed.
- The hook threads become worn.
- When the wear of the hook bushing reaches 50% of the original size, the bushing should be replaced.
- When the wear of the part hook mandrel reaches 5% of the original size, the mandrel should be replaced.
Due to the wide variety of hooks, it is not feasible to list product parameters individually here. For detailed product information and recommendations, please contact our staff before making a purchase. We will be happy to recommend the most suitable product type based on your usage environment and requirements.
