JM Electric Wire Rope Hoist
JM Electric Wire Rope HoistProduct Information:The JM electric wire rope hoist is powered by an electric motor and driven by an elastic coupling, a three-stage closed gear reducer, a jaw coupling, and a hydraulic push rod brake. This hoist has a large lifting capacity and is widely used in construction. It can also be used as auxiliary equipment in modern electronic-controlled automatic operation lines for material lifting or horizontal dragging in water conservation projects, forestry, mines, docks, and more.JM Hoist Operation Instructions:The wire ropes on the drum must be properly arranged. If they are stacked or tilted, stop the hoist and rearrange the ropes. Do not pull or step on the wire rope during operation. At least three turns of the wire rope should remain on the drum.The wire rope must not be knotted or twisted. If more than 10% of the wire is broken, the rope must be replaced.During operation, no one should pass under the wire rope. The operator must not leave the hoist while an object is lifted. During breaks, the load or cage should be lowered to the ground.The driver and signalman must clearly see the lifted object. They must cooperate closely and follow unified signal commands.In case of a power outage during operation, the power should be cut off, and the hoist should be lowered to the ground.Follow the commander's signals during operation. If a signal is unclear or could cause an accident, the operation should be paused and resumed only when the situation is clarified.In the event of a sudden power outage, immediately stop the hoist and lower the carried items to the ground.After the operation, the material tray should be lowered, and the electrical box should be closed and locked.The steel wire rope will wear out and suffer mechanical damage during use. Periodic application of protective oil is required.Overloading is strictly prohibited; the maximum load capacity must not be exceeded.Do not lift high-temperature objects directly, and take necessary precautions to protect sharp-edged objects...
- Ex Tax: 0.00₺
- Product Code: VİNÇ
- Availability: In Stock
JM Electric Wire Rope Hoist
Product Information:
The JM electric wire rope hoist is powered by an electric motor and driven by an elastic coupling, a three-stage closed gear reducer, a jaw coupling, and a hydraulic push rod brake. This hoist has a large lifting capacity and is widely used in construction. It can also be used as auxiliary equipment in modern electronic-controlled automatic operation lines for material lifting or horizontal dragging in water conservation projects, forestry, mines, docks, and more.
JM Hoist Operation Instructions:
- The wire ropes on the drum must be properly arranged. If they are stacked or tilted, stop the hoist and rearrange the ropes. Do not pull or step on the wire rope during operation. At least three turns of the wire rope should remain on the drum.
- The wire rope must not be knotted or twisted. If more than 10% of the wire is broken, the rope must be replaced.
- During operation, no one should pass under the wire rope. The operator must not leave the hoist while an object is lifted. During breaks, the load or cage should be lowered to the ground.
- The driver and signalman must clearly see the lifted object. They must cooperate closely and follow unified signal commands.
- In case of a power outage during operation, the power should be cut off, and the hoist should be lowered to the ground.
- Follow the commander's signals during operation. If a signal is unclear or could cause an accident, the operation should be paused and resumed only when the situation is clarified.
- In the event of a sudden power outage, immediately stop the hoist and lower the carried items to the ground.
- After the operation, the material tray should be lowered, and the electrical box should be closed and locked.
- The steel wire rope will wear out and suffer mechanical damage during use. Periodic application of protective oil is required.
- Overloading is strictly prohibited; the maximum load capacity must not be exceeded.
- Do not lift high-temperature objects directly, and take necessary precautions to protect sharp-edged objects.
